Control devices are designed for controlling various hydraulic actuators (winches, hydraulic actuators, steering gears, etc.) providing their start, stop, reverse, stable rate of actuator movement at the working fluid viscosity and load change.
Currently there are 14 standard sizes of control devices developed at the enterprise.
|Basic technical data|
|Working fluid||mineral oil|
|Working pressure depending on the device standard size, MPa (kgf/cm²)||4 (40); 10 (100)|
|Control type||electrical remote (d.c., rectified current, 27V, 20W)|
|Nominal bore, mm||10; 20|
|Rated flow of working fluid depending on the device standard size, l/min||3…25|
|Accuracy of working fluid flow rate through the actuator, when the working fluid viscosity and load change, %||±10|
|Mass depending on the device standard size, kg||36…74|